Surface Drains and Catch Basins in Nashville and Middle Tennessee
Yard Drainage and Grading

Surface Drains and Catch Basins

Surface drains and catch basins that gather water in low spots and pipe it to an outlet, with grates sized for lawns, driveways and garden beds.

When water pools in a spot and has nowhere to go, a catch basin is a simple fix. It is a box with a grate set into the lawn or paving, connected to a pipe that carries water away. Surface drains work best where water collects in a clear low point, such as the bottom of a slope, a corner by a patio or beside a driveway. Nashville yards with slopes and clay soil often have a small pond after a storm, and a basin turns it into a drain.

We find the low spot, check how much water arrives and plan a pipe route to an outlet, either a daylight pipe, a drain basin or a storm system where rules allow. We dig the pit, set a basin at the right height and connect the pipe with a steady slope. We choose a grate style that suits foot traffic, mowers or vehicles and add a sediment sump where helpful. We backfill, compact and finish with sod or stone around the grate. We show you how to clear leaves and debris so the basin keeps working.

Where water collects

A basin goes at the true low point, not just near the problem.

A pipe that leads somewhere

The basin only works with a pipe and an outlet.

Grates for the use

Lawn, walkway and driveway grates are rated for different loads.

Silt control

A small sump pit catches sediment before it enters the pipe.

What is included

  • Low spot and flow check
  • Pipe route and outlet
  • Basin and grate
  • Sediment sump
  • Backfill and finish
  • Care instructions
Why it works

What you get with Surface Drains and Catch Basins

Low point found

We place the basin where water actually collects.

Pipe to a real outlet

The basin connects to a pipe and an approved outlet.

Right grate

Grates are chosen for lawns, walks or vehicles.

Sediment sump

A small pit catches silt before it enters the pipe.

Neat finish

Sod or stone blends the basin into the yard.

Care shown

You learn how to clear the grate.

Try it now

Which Waterproofing Service Do I Need? Quiz

Answer five questions about your property, goals and timing to see which waterproofing services to start with.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you have seen, where and when, and we set a visit that fits your day.

  2. 02

    Inspect and measure

    We walk the outside and inside with a moisture meter, take photos, measure slopes and call for utility marking.

  3. 03

    Plan and approve

    You review the cause, the options and a plain written scope with every line and the schedule before anything is ordered.

  4. 04

    Prepare the site

    We handle permits, protect your property and prepare the work area, from the floor edge to the trench.

  5. 05

    Build and install

    We install drains, pumps, liners or repairs, restore floors and lawns and test every system with water.

  6. 06

    Walk through and care

    We walk the job with you, share a care guide and schedule a first checkup.

Questions

Surface Drains and Catch Basins FAQ

How does a catch basin work?

Water flows through the grate into a box and then into a pipe that carries it away.

Where should it go?

At the lowest point where water collects.

Will leaves clog it?

They can. A quick clearing before storms helps.

Can I drive over one?

Only with a grate rated for vehicles. We pick the right type.

Do I need more than one?

Large areas may need several. We map the water first.

Next step

Get your Free Waterproofing Inspection for Surface Drains and Catch Basins.

Tell us about your property and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your project

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Inspection