Masonry and concrete sealing with breathable sealers for brick, block, stone and slabs that repel water while letting trapped moisture escape.
Brick, block, stone and concrete are porous. They drink water, and then freeze, thaw, stain and crumble. A good sealer fills or lines the pores so water beads up instead of soaking in, but a bad one traps moisture and peels. Around Nashville, foundation brick, retaining walls, patios and basement floors all benefit from the right sealer at the right time, applied to a clean, dry surface in suitable weather.
We identify the material, check for cracks, loose mortar and existing coatings and clean the surface with a method that suits it. We repair joints and holes, let the surface dry and apply a penetrating or breathable sealer with a sprayer or roller, working in even coats. We choose products that let water vapor escape, especially on foundations and exterior walls, and we avoid film-forming sealers where they would trap moisture. We explain how long to avoid rain or traffic and how often to check the surface for wear. Sealing is a maintenance step, not a cure for a failing wall.
Sealers reduce absorption, which helps with stains and freeze damage.
Products let vapor out so moisture is not trapped behind a film.
Sealing over dirt or dampness leads to peeling.
Sealers wear, and the surface should be checked over time.
Brick, block, stone and concrete all behave differently.
Joints and cracks are fixed before sealing.
Products let vapor out while repelling liquid water.
Coats are applied evenly with the right tool.
We choose dry days and explain cure times.
Sealers wear and should be checked over time.
Every topic has its own page with what to expect and how we approach it.
Comparison guideCoatings and SealersHow masonry paints, cement-based coatings, penetrating sealers and epoxy floor coatings differ in what they do and where…Learn more 
ResourceXypexA maker of crystalline waterproofing materials used in concrete walls, slabs, pits and tunnels.Learn more 
ResourceDRYLOKA line of masonry waterproofing paints and sealers sold for basement walls and floors.Learn more Answer a few questions about where and when water shows up to see which solutions usually fit, from gutters and drains to crawl space work.
You tell us what you have seen, where and when, and we set a visit that fits your day.
We walk the outside and inside with a moisture meter, take photos, measure slopes and call for utility marking.
You review the cause, the options and a plain written scope with every line and the schedule before anything is ordered.
We handle permits, protect your property and prepare the work area, from the floor edge to the trench.
We install drains, pumps, liners or repairs, restore floors and lawns and test every system with water.
We walk the job with you, share a care guide and schedule a first checkup.
It reduces how much water soaks in, which helps with staining and freeze damage.
It reduces water absorption. It does not stop pressure from groundwater.
A film-forming sealer can. We choose breathable products on walls that release moisture.
It depends on the product and exposure. We suggest a check every few years.
Yes, with a sealer or epoxy suited to the slab and the use.
Waterproof Coatings and SealersWaterproof coatings and sealers for basement walls and floors, with surface preparation, the right product for the surface…Explore 
Block and Brick Foundation RepairBlock and brick foundation repair that rebuilds failing mortar joints, replaces damaged units and seals walls so water…Explore 
Efflorescence and Mineral Deposit RemovalEfflorescence and mineral deposit removal that cleans white powder from block and concrete walls and finds the moisture…Explore 
Driveway and Patio DrainageDriveway and patio drainage with trench drains, channel grates and regraded edges that move water off hard surfaces…Explore Tell us about your property and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
