Block and brick foundation repair that rebuilds failing mortar joints, replaces damaged units and seals walls so water and movement stop eating the masonry.
Block and brick foundations are made of many small pieces held together by mortar. Over time water softens joints, freeze and thaw cycles flake the faces and soil pressure pushes walls out of line. Older homes in and around Nashville often have brick or block foundations with soft mortar, cracked blocks or loose stones, and the repair is usually practical when it is done before the wall loses its shape.
We inspect the whole masonry surface, tapping for hollow spots, probing joints and noting where water stains or efflorescence appear. We cut out failed mortar, clean the joints and repoint with a mortar that matches the original in strength and appearance. Cracked or spalled blocks and bricks are replaced. We seal the surface where suitable, fix the source of water such as a failing gutter or a high soil line and, if the wall is leaning, explain what stabilization is needed. We take care to match mortar to the wall, because a mortar that is too hard can damage old brick.
A mix that suits your masonry protects old brick and block from damage.
Cracked and spalled units are cut out and replaced.
Gutters, soil lines and drainage are checked, since water breaks masonry down.
Movement is measured, and stabilization is discussed when it is needed.
We check joints, faces, cracks and water signs across the masonry.
The mix suits your brick or block so it does not damage the wall.
Cracked and spalled pieces are cut out and swapped.
Gutters and soil lines are checked as part of the repair.
A breathable sealer may protect the face.
Movement is measured and explained.
Every topic has its own page with what to expect and how we approach it.
Comparison guideCrack Repair MethodsHow epoxy injection, polyurethane injection, hydraulic cement and carbon fiber straps differ in what they fix.Learn more 
Comparison guideCoatings and SealersHow masonry paints, cement-based coatings, penetrating sealers and epoxy floor coatings differ in what they do and where…Learn more 
Comparison guideFoundation Warning SignsHow to read cracks, sticking doors, sloping floors and gaps, and which signs call for a closer look.Learn more Pick a drain, pump, repair, crawl space or drainage project, set the size and add allowances to see a ballpark planning range. Placeholder values only.
You tell us what you have seen, where and when, and we set a visit that fits your day.
We walk the outside and inside with a moisture meter, take photos, measure slopes and call for utility marking.
You review the cause, the options and a plain written scope with every line and the schedule before anything is ordered.
We handle permits, protect your property and prepare the work area, from the floor edge to the trench.
We install drains, pumps, liners or repairs, restore floors and lawns and test every system with water.
We walk the job with you, share a care guide and schedule a first checkup.
Removing old mortar from the joints and filling them with fresh mortar.
No. A mix that is too hard can crack old brick. Matching matters.
Water, freeze cycles and age break down faces and joints.
Often not. Targeted repair can restore many walls.
It can reduce water entry through joints. Drainage may still be needed.
Masonry and Concrete SealingMasonry and concrete sealing with breathable sealers for brick, block, stone and slabs that repel water while letting…Explore 
Efflorescence and Mineral Deposit RemovalEfflorescence and mineral deposit removal that cleans white powder from block and concrete walls and finds the moisture…Explore 
Bowing Wall RepairBowing wall repair that measures how far a foundation wall leans, finds the pressure behind it and recommends…Explore 
Foundation Crack RepairFoundation crack repair that reads the pattern of each crack, seals the ones that are stable and flags…Explore Tell us about your property and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
